Add convenient, motion-activated lighting to indoor spaces without fixed wiring. The D200 rechargeable ceiling light combines PIR motion detection, night and all-day sensor modes, adjustable white lighting and remote control. Choose a 5000mAh or 8000mAh battery configuration to suit your sourcing requirements.
D200 Product Highlights
- PIR motion detection with a 150° detection angle.
- Detection range of approximately 3–5m.
- Approximately 30-second auto-off delay in sensor mode.
- Night sensor, all-day sensor and always-on modes.
- 5000mAh or 8000mAh rechargeable battery options.
- USB-C charging.
- Warm white, natural white and cool white lighting settings.
- Adjustable brightness, remote control and on-device controls.
Motion Detection for Everyday Convenience
The D200 detects human movement within a range of approximately 3–5m and a detection angle of 150°. In sensor mode, the light switches off approximately 30 seconds after no further movement is detected.
Night Sensor Mode
The light responds to movement in low-light conditions and remains off in bright conditions.
All-Day Sensor Mode
The light responds to movement during both day and night, regardless of the surrounding light level.
Always-On Mode
Select always-on mode when you need continuous lighting rather than motion activation.
Detection performance varies with the installation position and environmental conditions.
Choose Your Battery Configuration
The D200 is available with a 5000mAh or 8000mAh rechargeable battery. Please specify your preferred configuration when requesting a quotation.
Recharge through the USB-C port. Operating time depends on the selected brightness, lighting mode and frequency of motion activation. Contact us for charging requirements and operating-time information for your selected configuration.
Adjustable White Lighting and Remote Control
Choose warm white, natural white or cool white lighting and adjust the brightness to suit your space. Use the remote to switch the light on or off, select a lighting mode, change the white light setting, adjust brightness and set a timer.
- NORMAL: Always-on lighting.
- AUTO1: Night sensor mode.
- AUTO2: All-day sensor mode.
- WW / NW / CW: Warm white, natural white and cool white.
- Brightness controls: Increase or decrease brightness, or select 10%, 50% or 100%.
- Timer controls: Select 2, 15, 30, 60 or 120 minutes, or cancel the timer.
Convenient On-Device Controls
The controls on the light provide direct access to its operating modes and lighting settings.
Mode Button
- First press: Night sensor mode.
- Second press: All-day sensor mode.
- Third press: Always-on mode.
- Fourth press: Off.
Light Settings Button
- Short press: Change the white light setting.
- Press and hold: Adjust brightness.
Product Specifications
| Model | D200 |
|---|---|
| Product Type | Rechargeable motion sensor ceiling light |
| Battery Options | 5000mAh / 8000mAh |
| Charging Port | USB-C |
| Sensor Type | PIR motion sensor with light sensing |
| Detection Angle | 150° |
| Detection Range | Approximately 3–5m |
| Auto-Off Delay | Approximately 30 seconds in sensor mode |
| Operating Modes | Night sensor / All-day sensor / Always on / Off |
| White Light Settings | Warm white / Natural white / Cool white |
| Brightness | Adjustable |
| Controls | Infrared remote and on-device buttons |
Discuss Your D200 Sourcing Requirements
Contact us for quotations, battery configurations, product specifications and OEM/ODM enquiries. Please include your preferred battery capacity, order quantity and destination market.
Email: services@szhhlight.com
WhatsApp: +86 180 8889 8360